Importations Thibault Ltée










ARMADILLO is a new generation of pipe guard that blends stainless steel and silicone to provide the best protection to the 2 stroke pipes. ​

The use of elastomer reduces vibration noises and it is resistant to high temperatures. ​

The mounting system makes it easy to install and disassemble the protection when cleaning, using only 3 brackets to assemble the part on the pipe and, after that, you only need to tight and loose 3 bolts.

The protection is flexible in order to adapt to your pipe’s shape. ARMADILLO is an universal protection for the 2 stroke bikes is abrasion and impact resistant, includes all the hardware and is available in brand colors.

Polisport releases the FORTRESS Skid Plates. These highly durable and resistant injection molded skid plates will provide full coverage to the engine and frame rails; being made of plastic the FORTRESS Skid Plates are quitter than metallic protections and have a slim fit to prevent mud, dirt or rocks to build up between the protector and the frame. ​

FORTRESS is also available with and without linkage protection.

The mounting system is also a highlight, especially for the 4 stroke models where the installation is easy, using a quick install lever clamp (check diagram below).

This new range will be released for selected models of KTM and Husqvarna, will be available in orange, black and white.​

HAMMER is the new model on Polisport’s handguards line with 1-point-mount, for MX and Enduro.

With it comes a new universal mounting system developed for simple and quick installation and a perfect fit on crowded handlebars.

The HAMMER offers a large plastic shape to protect hands and master cylinder, and 2 positions of horizontal adjustment to allow some level of customization when installed.

The minimalist design, with horizontal oriented vents and carbon texturized plastic cover, will match your bike and give it a stylish look.

HAMMER handguard will be available in special order in Polisport’s special colors – yellow FLUO and Nardo Grey.

Polisport releases the new NOMAD Handguard. This new full wrap around (2-point mount) plastic handguard was designed with a large protective shape, perfect to shield for roost and weather.

The mounting kit was also perfected, with fewer components, for an easy assembly.

The NOMAD handguard is suited for Off-road and on-road use – rally, dual-sport, trail, enduro – and will be available in white, black, blue, orange, red and in special order in the special color Nardo Grey.


MT HELMETS helmets have been approved by the most demanding international certifications. DOT CERTIFIED (USA), ECE / UN 22.05.P (EU) certifications cover the most stringent homologation standards in the United States and Europe. These approvals are only granted when all the components of the helmets have passed the previously established safety tests.

Size and weight of shell
2 External caliper sizes
Interior Flame Retardant
Internal shell with high impact absorption
Internal polystyrene of multiple density
Removable and washable pads
Injected thermoplastic shell
Closing system with double “D”
Air tickets




Blending high end materials with leading edge design, the SCOTT 350 EVO Helmet is available in two versions. The 350 EVO with the Scott Conehead technology (dual density EPS) and the 350 EVO PLUS offers a higher level of protection thanks to the inclusion of the MIPS® Brain Protection System.

It enables better protection of the head by reducing the impact of rotational forces through a crush.
If you are looking for safety, style and design this is your helmet.

• ABS shell
• Optimized ventilation
• Removable and washable liner & cheek
• Easy adjust visor





The SCOTT Enduro Jersey combines durablity with breathability.
Purpose built for varied and ever changing enduro terrain. High collared neck, durable chest and sleeeves and mesh side ventilation make this a complete enduro jersey.
CONSTRUCTION Durable stretch polyester chassis, Vented mesh side panels, Padded elbows, Exended collar height, Silicon no slip rear panel
COMPOSITION 97% Polyester, 3% Polyurethane
FIT Regular
FEATURES High neck collar
Strategic ventilation panels
Padded elbows
Lasting durable chassis

The SCOTT Enduro Pant delivers all you expect and need from an Enduro pant: Durable chassis, directly injected, reinforced knees for an extra layer of protection, dual zipped vent panels and much more. If you are looking for functionality and design this is your must have.

CONSTRUCTION 900D Nylon, 1680 Ballistic Nylon, Electric mesh, Stretch Kevlar inner knee, TPR outer knee
COMPOSITION 97% Polyester, 1% Polyamide, 1%Elastine, 1% Leather
FIT Regular
Athletic fit
Large knee area will accommodate all MX knee braces
Stretch inner liner
Laser cut perforated vetilation on thigh panel
Silicon grip on inner waistband to eliminate
slippage due to gripper / step seats
Articulated velcro stretch waist closures for a perfect adjustable fit
Nylon 900 D® inner lining on knee leather to eliminate knee brace abrasion

The SCOTT Enduro Glove is purpose built for the varied Enduro lifestyle. It has directly inject TPR protecting knuckles and fingers, aIrprene cuff with TPR Velcro closure adding to a secure fit and touchscreen technology on first fingertip.

COMPOSITION 40% Polyurethane, 25% Polyester, 20% Polychloroprene, 10% Nylon, 5% Polyvinyl Chlorid
FIT Regular
FEATURES Durable and flexible back of hand with Direct Inject TPR protection
Adjustable hook and loop TPR wrist closure
Reinforced gussets
Touchscreen 1st finger


The SCOTT Enduro Vest provides all the high-end features a rider needs. It is a perfect choice for anybody that is looking for comfort, durability and functionality. Riders can wear it over a jacket or simply use it as a vest depending on weather and riding conditions.

CONSTRUCTION Wind resistant polyester, Lycra
COMPOSITION 100% Polyester
FIT Regular
FEATURES Wind resistant chassis
Lycra side stretch panels
Two front zipped pockets
One rear zipped pocket (perfect size for rain jacket and spare gloves)



The revolutionary Softcon 2 family is the most flexible and comfortable solution to be protected without compromising safety. Combining innovative D3O materials and a unique design, the new Softcon 2 delivers unparalleled freedom of movement while remaining highly protective. Our expertise allows you to push your safety beyond standards. No matter which model of the family you chose – it will be your perfect companion that keeps you safe while riding.

The D3O plate used for the Softcon 2 Jacket Protector and Body Armor uses a SCOTT exclusive design and exemplifies cutting edge personal safety. The plate features a low profile and an invisible look under the jersey plus gives additional protection due to the extended coverage in length and in width. For sure it convinces any rider in its extreme flexibility and softness.


D3O® is a unique material that focuses on energy dispersion in critical areas for maximum shock absorption and protection. The functionality of the raw material originates from the synergetic effects of the polymer-based dilatant. Energy is distributed throughout the synthetic elastomeric polymer and the enhanced chemistry continues to disperse the energy throughout the matrix, significantly reducing the effect of impact.


Unique technology that focuses on energy absorption and protection.


Provides maximum comfort and protection at the same time.


Integrated D3O protectors allow for highest levels of safety according to CE EN 1621.



Gx1 : The latest innovative entry level boot for off-road, also available with specific sole developed for Enduro.

GX1 incorporates technology and styling that features protection and performance, providing an immediate step in comfort.
High Quality Material and Made in Italy.
The structural support consists of two lugs that slide inside designed pockets, avoiding front and rear overextension while providing flex forwards and backwards, it is anti-torsion.
On the upper side stamped suede for increased grip and heat resistance. Closure system consists of 4 light alloy replaceable buckles for an easy, fast and precise closure.
By removing the first two buckles on the top it is possible to make the opening wider to accommodate a bigger leg or knee-brace.
Exclusive high grip rubber compound sole to grant durability, superior grip and perfect feeling while riding.



The BATTLECROSS E50 is the most versatile off-road tire in the BATTLECROSS line-up.
The E50 is built specifically with the hardcore Enduro rider in mind, where the rider must traverse multiple surfaces in one ride.

Specifically designed for the hard core Enduro rider.
• The E50 tire is optimized for a broad spectrum of off-road riding.
• Improved off-road traction due to a new front and rear tread pattern, Castle Block™ Technology, increased block rigidity, and the additional biting edges of our bunker technology*.
• Improved cornering grip from the newly designed front and rear tread pattern, Castle Block™ Technology, and increased block rigidity*.
• The E50 is easier to mount because we optimized the sidewall rigidity and the profile to improve rim fitting at the track or on the trail*.
• DOT approved.






Follow us

Subscribe to our newsletter